Single Row Full Complement Cylindrical Roller Bearings with Disc Cage

 

Designation

Boundary Dimension(mm)

Basic Load ratings(KN)

Limiting Speed r/min

Weight

(kg)

INA CODE

d

D

B

rsmin

s

Cr

Cor

LSL192320 100 215 73 3 4 670 800 6500 12.8
LSL192322 110 240 80 3 5 790 940 5600 17.3
LSL192324 120 260 86 3 5 950 1150 5300 22
LSL192326 130 280 93 4 5 1070 1300 4900 27.2
LSL192328 140 300 102 4 7 1200 1470 4600 34
LSL192330 150 320 108 4 7 1420 1780 4200 40.7
LSL192332 160 340 114 4 7 1600 2020 3900 48
LSL192334 170 360 120 4 7 1750 2230 3800 57.5
LSL192336 180 380 126 4 7 1850 2440 3500 67.4
LSL192338 190 400 132 5 7 2110 2750 3400 78.1
LSL192340 200 420 138 5 7 2350 3050 3200 89.3
LSL192344 220 460 145 5 7 2500 3200 2900 108
LSL192348 240 500 155 5 10 2750 3550 2700 138.6
LSL192352 260 540 165 6 10 3400 4400 2400 168
LSL192356 280 580 175 6 12 3700 4850 2300 206.6
LSL192360 300 620 185 7.5 12 4150 5600 2200 253

 

Single Row Full complement cylindrical roller bearings with disc cage
Single Row Full complement cylindrical roller bearings have solid inner and outer rings and rib-guided cylindrical rollers. Single Row full complement cylindrical roller bearings are available as semi-locating, full complement cylindrical roller set. They can support not only high radial forces but also axial forces in one direction and can therefore guide shaft axially in one direction. They act as non-locating bearings in the opposite direction. LYNB single row full complement cylindrical roller bearings are extensively used in wire rope pulley of hoisting machine and low-speed heavy load occasions of general machinery.
Cylindrical roller bearings with a disc cage (series LSL) or with spacers (series ZSL) are of a single row, self-retaining design and correspond to dimension series 23. They have solid outer rings with two ribs, while the inner rings have one rib. The inner ring is removable and thus allows easier mounting of the bearings. The disc cages or spacers prevent the cylindrical rollers from coming into contact with each other during rolling.
X-life Many sizes are supplied in X-life design. These bearings are indicated in the dimension tables.
Bearings of X-life quality have a lower roughness Ra and superior geometrical accuracy of the raceways than comparable designs that are not X-life. As a result, the load carrying capacity and life of these bearings is higher while maintaining the same dimensions. In certain applications, a smaller design of bearing arrangement can therefore be used if necessary.
▲   The design’s of all these full complement cylindrical roller bearings are based on standard structures; LYNB can design and manufacture many other similar structures in accordance to the special and particular requirements of their customers’. If our customer’s have specific requests then the customer should identify the structure, and mounting dimensions that are required. Please contact the LYNB Technical Center if you need any assistance in this area.  
 
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
  • Product Name:
  • *Company Name:
  • *Your Name:
  • *E-mail:
  • Tel./ Fax.:
  • Country:
  • Picture / File:
  • *Content:
  • .
Contact Us
Luoyang Nice Bearing Co.,Ltd.
Leave a Message
Please leave a message,and we will immediately answer your questions.
Company Name:
*Your Name:
*E-mail:
County:
*Content:
.
Copyright © 2015 Luoyang Nice Bearing Co.,Ltd. All rights Reserved. Power By Sinoart